-14%

8 ft Deck Over Dolly

Name: 8 ft Deck Over Dolly
SKU: AM-001
Availability: InStock

Add to wishlist

(0 reviews)

23 people are viewing this right now

Estimated Delivery:

May 31 - 07 Jun, 2025

Guaranteed safe & secure checkout

Product details

Tow Dolly
Stock Number 035365
Year: 2020
Manufacturer: Deck Over Dolly
MFG Model Num: 85X8SA
Trailer Size: 8.5X8
Trailer Color: Black

Trailer weight: 1090lb/7000gvwr
Carry Capacity: 5910lb
2-5/16″ A Frame Coupler 14000#
(1) 7000lb Torsion Axle with Electric Brakes and Breakaway Kit and Battery
EZ Lube Hubs
ST225/75R15 Load Range E Radial Tires
6 Lug Gray Mod Steel Wheels
Removable ATP Stoneguard
60″ Triple Tube Tongue
Front Wind Jack
Weld On D-Rings
Steel Treadplate Deck
Black Automotive Grade Painted Deck and Frame
(1) Set of Straps for Vehicle
(1) Wrench
(3) Ramps

Quick Comparison

8 ft Deck Over Dolly remove Galvanized Stow and Go Folding Car Tow Dolly with Surge Brake RV Trailer 4900 lb remove Carry-On Trailer 5-ft x 8-ft Treated Lumber Utility Trailer with Ramp Gate remove L2910 2 Post Car Lift 9,000 LB Capacity Auto Truck Hoist 220V remove Carry-On Trailer 6-ft x 16-ft Treated Lumber Utility Trailer with Ramp Gate remove MAXJAX | M6K Portable Two-Post Garage Lift Supreme Package remove

Name 8 ft Deck Over Dolly remove Galvanized Stow and Go Folding Car Tow Dolly with Surge Brake RV Trailer 4900 lb remove Carry-On Trailer 5-ft x 8-ft Treated Lumber Utility Trailer with Ramp Gate remove L2910 2 Post Car Lift 9,000 LB Capacity Auto Truck Hoist 220V remove Carry-On Trailer 6-ft x 16-ft Treated Lumber Utility Trailer with Ramp Gate remove MAXJAX | M6K Portable Two-Post Garage Lift Supreme Package remove

Image

SKU AM-001 AM-007 AM-003 AC-006 AM-006 XY-172

Rating

Price

Save 14%

Save 20%

Save 13%

Save 5%

Save 20%

Save 8%

Stock

Availability

Add to cart

Description

Content

Tow Dolly Stock Number 035365 Year: 2020 Manufacturer: Deck Over Dolly MFG Model Num: 85X8SA Trailer Size: 8.5X8 Trailer Color: Black

Trailer weight: 1090lb/7000gvwr Carry Capacity: 5910lb 2-5/16″ A Frame Coupler 14000# (1) 7000lb Torsion Axle with Electric Brakes and Breakaway Kit and Battery EZ Lube Hubs ST225/75R15 Load Range E Radial Tires 6 Lug Gray Mod Steel Wheels Removable ATP Stoneguard 60″ Triple Tube Tongue Front Wind Jack Weld On D-Rings Steel Treadplate Deck Black Automotive Grade Painted Deck and Frame (1) Set of Straps for Vehicle (1) Wrench (3) Ramps

About this item:

For over ten years, our tow dollies have been a top choice for RVers and folks searching for premium car tow dollies online, our new STOW and GO FOLDING Featuring a robust steel frame, swivel tire pan, and a fold-and-store design, makes traveling with a second vehicle a pleasurable proposition. Construction: We built our 670-lb folding car tow dolly with heavy-duty galvanized steel. The process of galvanizing involves coating the steel in layers of zinc. For buyers, this means you’re getting a trailer that’s hardwearing, rust-resistant, and one heck of a head-turner. Additionally, we equip the tow dolly with a swivel pan to relieve stress on the vehicle-in-tow’s front end. Instead of engaging the vehicle-in-tow’s steering box when turning, the swivel pan does the work. Fold and Store: unique design provides a space-saving solution by allowing the user to transform the car tow dolly from 132.5 inches length extended to just 72 inches folded. How? Just fold up the ramps; remove the clevis pin from the tongue, and use the swivel wheel on the trailer jack to roll the tongue towards the tow dolly’s fender. That’s a size reduction of nearly 50 percent. And that’s space you can use for something else in your driveway, garage, or RV lot. Hydraulic Surge Brakes: In most states, brakes and an emergency breakaway system are required by law. So, it fit with every drum brakes and a Demco actuator (includes a breakaway cable). These are standard equipment on our foldable car tow dolly at no additional charge.

Features:

Integrated folding ramps
Folding tongue
72″ folded length—reduced footprint saves space and money at RV lots
3,500 lb Maximum over-the-axle weight
Trailer tongue jack with swivel wheel—included
Tongue handle for easy moving, coupling, and uncoupling
2″ Ball coupler
2 Safety chains
Integrated, adjustable winches—MAXIMUM ease-of-use
Hydraulic surge brakes
- Drum brakes
- Demco DA66 actuator
- Emergency breakaway system
14″ Steel wheels
Sturdy steel fenders—silver powder-coated
Tilting swivel pan—easy loading
2 Redundant security chains for added peace of mind—included
DOT approved LED taillights—LED lights last longer than incandescent bulbs
Low-weight, high-strength tubular steel construction—tow your second vehicle with confidence
4-pin flat connector—factory molded
Premium galvanized finish—ensures rust-free protection for years to come

Specifications:

Empty Weight 670 lb
Maximum Over-the-Axle Weight 3,500 lb
Maximum Vehicle-in-Tow Curb Weight 4,900 lb
Coupler: 2”
Finish: Galvanized
6,500-lb-rated Lashing Winches
12,000 lb Rated Tire Nets (Free straps included)
Dual Safety Chain Set
Heavy Duty Spindles & Cast Hubs w/ Easy-Lube Hub
Sturdy Steel Fenders—silver powder-coated
Tires: 14” Heavy Duty
DOT Approved Lighting
Pre-Wired Factory Wiring Harness
Drum Brakes
Demco Actuator and Emergency Breakaway System (hydraulic surge brakes)
LED Taillights
Maintenance-Free Teflon Pads for Easy Turning Pan
Tire Pan Width : 79 1/2 in. maximum width / 43 3/4 in. minimum width
Requirements: Flat 4-Pin Connector / 2″ Ball / 18″ Tongue Height

Introducing the Carry-On Trailer 5-ft x 8-ft Treated Lumber Utility Trailer with Ramp Gate—a versatile and reliable solution for all your hauling needs. This trailer is thoughtfully designed and proudly made in the USA, offering a range of features that make it an essential tool for homeowners and professionals alike. Durable and Replaceable Wood Floor: The 2×8 treated wood floor is not only highly durable but also designed to securely hold and evenly disperse the weight of your cargo. Additionally, it allows for easy replacement of individual boards when needed, ensuring the longevity of your investment. Effortless Maneuverability: Featuring a straight tongue, this trailer is a breeze to maneuver when backing up or navigating sharp turns. You’ll find it remarkably user-friendly, saving you time and effort during transportation. Enhanced Protection: The steel fenders are a testament to the trailer’s durability. They provide superior protection against impact and wear compared to plastic alternatives, ensuring that your investment remains in top condition for years to come. Warranty for Peace of Mind: Carry-On Trailer stands behind their product with a one-year limited warranty, demonstrating their commitment to delivering high quality, dependability, and reliability. You can trust in the quality of your trailer. Dependable American Craftsmanship: This utility trailer proudly bears the “Made in the USA” label, reflecting the excellence of American craftsmanship and design. Spacious and Versatile: With a 5-ft width and an 8-ft length, this utility trailer offers ample space for various hauling needs. Whether you’re transporting equipment, furniture, or materials, it has the capacity to get the job done. User-Friendly and Efficient: Boasting a load capacity of 1,600 lbs, this utility trailer is well-suited for a wide range of tasks. Its 12-inch tires ensure stability and a smooth ride, even on uneven terrain. Please note that registration, taxes, and fees may vary by state, so be prepared for some paperwork and processing during pickup. The sleek black finish of the Carry-On Trailer 5-ft x 8-ft Treated Lumber Utility Trailer with Ramp Gate not only adds a touch of style but also signifies its reliability and functionality. Make your hauling tasks easier and more efficient with this dependable trailer by your side.

XINKONG 9,000 LB L2910 2 POST LIFT CAR LIFT AUTO TRUCK H

XINKONG
COME WITH ADJUSTABLE PADS. TRUCK ADAPTERS ARE INCLUDED
SAFETY MECHANISM:
DOUBLE POINT SAFETY LOCK RELEASE
AUTOMATIC ARM LOCK RESTRAINTS
RELIEF VALVE BUILT IN POWER PUMP TO PREVENT OVERLOADING
DOOR GUARDS PROTECTION RUBBER
UP-LIMIT SWITCH TO PROTECT CYLINDERS WORKING STROKE USED IN SAFE LENGTH SCOPE
HEAVY DUTY 5/16″ DIAMETER CABLE AND 4.56″ PULLEY REDUCE HIGH STRESS ON SYNCHRONIZATION PROCESS AND INCREASE CABLE LIFE
STIFFENED BASE PLATE 15/32″ THICKNESS
ULTRA HIGH MOLECULAR SELF LUBRICATING NYLON SLIDER ENSURES CARRIAGE SMOOTH MOVING UP AND DOWN
ANCHOR BOLTS/MOUNTING HARDWARE INCLUDED

CONTROL SYSTEM

LIFTING OPERATION BY PRESSING “UP” BUTTON ON MOTOR
MANUAL LOWERING OPERATION BY PRESSING LEVER
RELIEF VALVE BUILT IN POWER PUMP TO PREVENT OVERLOADING
LIFTING CAPACITY: 9,000 LBS
THE OVERALL HEIGHT 145 21/32″
THE OVERALL WIDTH 133-1/4″
COLUMN WIDTH 10.59″

DISTANCE BETWEEN 2 POST 106-5/16″

Overall width 131-1/2″
Base Width 14-9/16″
Column Thickness of Steel 11/64″
Carriage Thickness of Steel 3/16″
Arms Thickness of Steel 15/64″
Front Arm 29.9″-47.2″
Rear Arm 29.9″-47.2″
Min pad height: 3-7/8″
Lift height max: 74-13/16
Drive-thru width clearance: 99-7/32″
Time to full rise: 55 sec
Shipping Weight: 1370 lbs

Site Selection Before installing your auto lift, check the following: Lift Location: Always use architect’s plans when available. Check layout dimension against floor plan requirements making sure adequate space is available. Your lift requires a 220v or 110v , 30amp, single phase, grounded electrical source. There should be room enough to operate the lift in a safe manner and without restrictions. Overhead Area: The area where the lift will be located should be free of overhead obstructions such as heaters, building supports, electrical lines, doors, lights, etc. Floor Area: Visually inspect the site where the lift is to be installed and check for cracked or defective concrete. Floor Requirements A level floor is suggested for proper installation and level lifting. Small differences in floor slopes may be compensated for by proper shimming. If a floor is of questionable slope, consider a survey of the site and/or the possibility of pouring a new level concrete slab. New concrete must be adequately cured for at least 30 days. DO NOT install auto lift on any asphalt surface or any surface other than concrete. DO NOT install auto lift on expansion seams or on cracked or defective concrete. DO NOT install auto lift on a second/elevated floor without first consulting building architect. DO NOT install auto lift outdoors unless special consideration has been made to protect the power unit from inclement weather conditions. Concrete Specifications All models MUST be installed on 3,000 PSI reinforced concrete only. Additional concrete requirements will vary by lift. 8,500 lbs – 10,000 lbs lifts: 4? Minimum Thickness 11,000 lbs – 15,000 lbs lifts: 6? Minimum Thickness Shipping: – We only ship inside the USA 48 States (Free to Commercial Address Only). – Residential or Farmland Delivery $100 Extra Charge from Freight Company. – We do not ship to Alaska, Hawaii, Guam, Virgin Islands, Puerto Rico, PO Box addresses or APO/FPO addresses. Equipment Required for unloading: -Forklift or Tractor is required from customer for unloading the product. -Terminal Pickup can be requested if customer does not have the ability to unload.

Introducing the Carry-On Trailer 6-ft x 16-ft Treated Lumber Utility Trailer with Ramp Gate—a powerful workhorse that’s ready to handle your heavy-duty hauling needs. With its impressive load capacity and practical features, this trailer is designed to make your tasks easier and more efficient. Robust Load Capacity: This utility trailer boasts a substantial 5,250 lb. load capacity, making it ideal for transporting large and heavy items. Whether you’re moving construction materials, equipment, or bulky cargo, this trailer has you covered. High Sides for Added Security: The 24-inch high sides provide extra security for your cargo, ensuring that it stays in place during transit. You can haul taller items with confidence, knowing they are well-protected. Convenient Folding-Ramp Gate: The folding-ramp gate makes loading and unloading a breeze. It provides easy access to the trailer bed, allowing you to roll or slide your cargo on and off with minimal effort. Safety First: Safety is a priority, and this trailer delivers. The 2-5/16-inch coupler comes with safety chains to ensure a secure connection to your towing vehicle, and it meets safety standards for worry-free towing. Durable and Reliable: The pressure-treated lumber floor is not only durable but also designed to withstand heavy use. It provides a solid and stable surface for your cargo, ensuring it remains secure during transport. Lockable Storage Box: The addition of a lockable storage box is a convenient feature. It allows you to keep your tools, equipment, or other valuable items secure while on the road. Dependable and Road-Ready: With a 6-ft width and a 16-ft length, this utility trailer offers ample space for various hauling needs. The 3,500 lb. axle ensures stability and reliability, even when transporting heavy loads. Lighted to DOT Specs: This trailer is equipped with lighting that meets DOT (Department of Transportation) specifications, ensuring that you remain visible and compliant with safety regulations on the road. The Carry-On Trailer 6-ft x 16-ft Treated Lumber Utility Trailer with Ramp Gate combines strength, convenience, and safety into one impressive package. Its sleek black finish not only adds a touch of style but also signifies its durability and functionality. Trust in this trailer to simplify your hauling tasks and make them more efficient and productive.

For convenience, portability and compact storage, nothing beats the patented MaxJax® portable car lift. Thanks to its unique portable two-post design, the MaxJax offers greater versatility and serviceability when compared to traditional mid-rise or low-rise garage lifting systems. Safety Features from the Ground Up

No one in the industry has a more sophisticated and comprehensive research and quality control program than MaxJax, and our thousands of customers worldwide prove it.
Low-pressure HVLP Direct-Drive cylinders eliminate the need for lifting chains or screw mechanisms most commonly found on other lift designs.
Hydraulic cylinders feature integrated velocity-fuse safety valves.
A cast iron gear flow divider provides precisely equalized lifting for uniform division of hydraulic power.
Rugged safety lock bars are capable of holding three-times the rated lifting capacity.
Arm restraints automatically engage each time the lift is raised.
Detailed installation, maintenance and safety instructions accompany each MaxJax car lift.
MaxJax encourages all owners to know their equipment and to follow good safety practices when using any of our products. Your MaxJax car lift equipment has been designed and built with your safety in mind, but the ultimate responsibility for safe operation is with you, the operator.

MaxJax is protected by one or more patents or claims of patents in the U.S. and elsewhere. This is provided to satisfy the virtual patent marking provisions of various jurisdictions, including the virtual patent marking provisions of the America Invents Act, as codified in 35 U.S.C. § 287(a). PATENT NO. US 8.256.577 B2 and PATENT NO. US 9.150.395 B2 Benefits of the MaxJax It’s the features you get that set the MaxJax apart from the rest. Every MaxJax unit is loaded with the right features that make it the best choice when looking for a new car lift. Read through the long list of features this car lift has to offer and you’ll easily come to the conclusion that the MaxJax is no ordinary garage lift.Clear undercar access No other low-rise or mid-rise lift system provides more under-car clearance and unobstructed floor space than the MaxJax lifting system. Now you can easily access engine undersides, transmissions, drive-shafts, starters, differentials or anything else requiring under-car access. MaxJax two-post lift portable columnsPortability A two-post car lift with built-in wheels that allows you to use the lift when you need it, then conveniently store it out of the way when not in use keeping your garage and vehicle lanes clutter-free.Stow to go in less than 15-minutes Internally threaded recessed drop-in anchors and quick-connect/disconnect hydraulic couplers provide for fast and simple set-up. NOTICE: Before drilling into post-tension garage floors, always consult a building engineer for determining cable locations and where to avoid drilling. MaxJax two-post lift flow dividerWorks like magic A cast iron gear flow divider is the heart of the MaxJax® system, providing precisely equalized lifting. The specially designed flow divider/combiner is a positive-displacement fluid control device with precise flow division of hydraulic power from one column to the other even if load balance pressures change.Mobile power unit cart Our standard mobile power unit cart is small enough to be stored out of the way and features a storage area for the hydraulic hoses. The hydraulic power unit uses a single-phase motor that requires 110-volts AC and a 23 amp breaker. The industrial grade power cord is 6-Ft. long. A simple push-button switch raises the lift and a push lever controls the lowering. Simple quick-disconnect hoses can be positioned easily for single or dual column operation.

Specifications

Lifting Capacity:	6,000 lbs. (2,722 kg)
Max Load Per Arm:	1,500 lbs. (680 kg)
Height Overall:	89.5″ (2,273 mm)
Height of Column:	64″ (1,626 mm)
Min. Pad Height:	4.5″ (114 mm)
Max Lift Height (Pad Only):	47.5″ (1,207 mm)
Max Lift Height (With 3″ Adapter):	50.5″ (1,283 mm)
Arm Reach (Min – Max):	26″ – 40″ (660 mm – 1,016 mm)
Typical Width (Outside of Base Plate):	105″ – 135″ (2,667 mm – 3,429 mm)
Drive-thru clearance:	74″ – 104″ (1,880 mm – 2,642 mm)
Locking Positions:	7 (every 3″)
Motor:	110 VAC / 50-60 Hz. / 1 Ph. (23A Breaker)
Time of full Rise:	45-seconds
Individual Column Weight:	300 lbs. (136 kg)
Shipping Weight (Standard Model):	980 lbs. (444 kg)
Shipping Dimensions (Standard Model):	68″ x 39″ x 35″ (1,727 mm x 990.6 mm x 889 mm)

Weight N/A N/A N/A N/A N/A N/A

Dimensions N/A N/A N/A N/A N/A N/A

Additional information

Sold 0 0 0 0 0 0

Shipping