GET EXTRA $20 OFF ON ORDER OVER $130 + FREE SHIPPING CODE: NYS20
-18%

L2900 2-Post Lift 9,000 Lb Capacity Car Auto Truck Hoist 220v Or 110v

Original price was: $1,100.00.Current price is: $899.00.
27 people are viewing this right now
Estimated Delivery:
Jun 26 - 03 Jul, 2025
Trust Badge
Guaranteed safe & secure checkout

Product details

The L2900 Two Post Lift is a car lift designed for automotive service and repair shops. It has a lifting capacity of 9,000 lbs, making it suitable for a wide range of vehicles. The lift features a two-post design, allowing for efficient use of floor space, and its hydraulic operation provides smooth and controlled lifting. It is available in both 220V and 110V versions and its heavy-duty construction provides reliable and long-lasting performance. The lift is designed to make maintenance and repair work on vehicles more convenient and efficient.

 

 

 

 

 

 

Features:

Safety Mechanism:

  • Double Point Safety Lock Release
  • automatic Arm Lock Restraints
  • relief Valve Built In Power Pump To Prevent Overloading
  • door Guards Protection Rubber
  • up-limit Switch To Protect Cylinders Working Stroke Used In Safe Length Scope
  • heavy Duty 5/16″ Diameter Cable And 4.56″ Pulley Reduce High Stress On Synchronization Process And Increase Cable Life
  • stiffened Base Plate 15/32″ Thickness
  • ultra High Molecular Self Lubricating Nylon Slider Ensures Carriage Smooth Moving Up And Down
  • anchor Bolts/mounting Hardware Included

Control System:

  • Lifting Operation By Pressing “Up” Button On Motor
  • manual Lowering Operation By Pressing Lever
  • relief Valve Built In Power Pump To Prevent Overloading
  • 1 Sets Truck Adapters Included
  • lifting Capacity: 9,000 Lbs
  • the Overall Height 111-3/32″
  • the Overall Width 133-1/4″
  • column Width 10.59″

width Between Two Post 106.3″

  • Base Width 18.89″
  • column Thickness Of Steel 11/64″
  • carriage Thickness Of Steel 3/16″
  • arms Thickness Of Steel 15/64″
  • front Arm 29.9″-47.2″
  • rear Arm 29.9″-47.2″
  • min Pad Height: 3-7/8″
  • lift Height Max: 71.6″
  • drive-thru Width Clearance: 99.2″
  • Time To Full Rise: 20-60 Sec
  • Shipping Weight: 1150 Lbs

Before Installing Your Auto Lift, Check The Following:

Lift Location: Always Use Architect’s Plans When Available. Check Layout Dimension Against Floor Plan Requirements Making Sure Adequate Space Is Available. Your Lift Requires A 220v Or 110v , 30amp, Single Phase, Grounded Electrical Source. There Should Be Room Enough To Operate The Lift In A Safe Manner And Without Restrictions.

Overhead Area: The Area Where The Lift Will Be Located Should Be Free Of Overhead Obstructions Such As Heaters, Building Supports, Electrical Lines, Doors, Lights, Etc.

Floor Area: Visually Inspect The Site Where The Lift Is To Be Installed And Check For Cracked Or Defective Concrete.

Floor Requirements:

A Level Floor Is Suggested For Proper Installation And Level Lifting. Small Differences In Floor Slopes May Be Compensated For By Proper Shimming. If A Floor Is Of Questionable Slope, Consider A Survey Of The Site And/or The Possibility Of Pouring A New Level Concrete Slab.

  • New Concrete Must Be Adequately Cured For At Least 30 Days.
  • Do Not Install Auto Lift On Any Asphalt Surface Or Any Surface Other Than Concrete.
  • Do Not Install Auto Lift On Expansion Seams Or On Cracked Or Defective Concrete.
  • Do Not Install Auto Lift On A Second/elevated Floor Without First Consulting Building Architect.
  • Do Not Install Auto Lift Outdoors Unless Special Consideration Has Been Made To Protect The Power Unit From Inclement Weather Conditions.

Concrete Specifications:

  • All Models Must Be Installed On 3,000 Psi Reinforced Concrete Only. Additional Concrete Requirements Will Vary By Lift.
  • 8,500 Lbs – 10,000 Lbs Lifts: 4? Minimum Thickness
  • 11,000 Lbs – 15,000 Lbs Lifts: 6? Minimum Thickness

Quick Comparison

L2900 2-Post Lift 9,000 Lb Capacity Car Auto Truck Hoist 220v Or 110v removeGalvanized Stow and Go Folding Car Tow Dolly with Surge Brake RV Trailer 4900 lb removeCarry-On Trailer 6-ft x 12-ft Enclosed Trailer removeL2910 2 Post Car Lift 9,000 LB Capacity Auto Truck Hoist 220V remove8 ft Deck Over Dolly removeCarry-On Trailer 6-ft x 16-ft Treated Lumber Utility Trailer with Ramp Gate remove
NameL2900 2-Post Lift 9,000 Lb Capacity Car Auto Truck Hoist 220v Or 110v removeGalvanized Stow and Go Folding Car Tow Dolly with Surge Brake RV Trailer 4900 lb removeCarry-On Trailer 6-ft x 12-ft Enclosed Trailer removeL2910 2 Post Car Lift 9,000 LB Capacity Auto Truck Hoist 220V remove8 ft Deck Over Dolly removeCarry-On Trailer 6-ft x 16-ft Treated Lumber Utility Trailer with Ramp Gate remove
Image
SKUGRD-0010AM-007AM-004AC-006AM-001AM-006
Rating
Price
Original price was: $1,100.00.Current price is: $899.00.
Save 18%
Original price was: $750.00.Current price is: $599.00.
Save 20%
Original price was: $1,000.00.Current price is: $899.00.
Save 10%
Original price was: $1,000.00.Current price is: $949.00.
Save 5%
Original price was: $1,100.00.Current price is: $949.00.
Save 14%
Original price was: $1,100.00.Current price is: $879.00.
Save 20%
Stock
Availability
Add to cart

Description
Content
The L2900 Two Post Lift is a car lift designed for automotive service and repair shops. It has a lifting capacity of 9,000 lbs, making it suitable for a wide range of vehicles. The lift features a two-post design, allowing for efficient use of floor space, and its hydraulic operation provides smooth and controlled lifting. It is available in both 220V and 110V versions and its heavy-duty construction provides reliable and long-lasting performance. The lift is designed to make maintenance and repair work on vehicles more convenient and efficient.  
 
 
 
 
 

Features:

Safety Mechanism:
  • Double Point Safety Lock Release
  • automatic Arm Lock Restraints
  • relief Valve Built In Power Pump To Prevent Overloading
  • door Guards Protection Rubber
  • up-limit Switch To Protect Cylinders Working Stroke Used In Safe Length Scope
  • heavy Duty 5/16″ Diameter Cable And 4.56″ Pulley Reduce High Stress On Synchronization Process And Increase Cable Life
  • stiffened Base Plate 15/32″ Thickness
  • ultra High Molecular Self Lubricating Nylon Slider Ensures Carriage Smooth Moving Up And Down
  • anchor Bolts/mounting Hardware Included
Control System:
  • Lifting Operation By Pressing “Up” Button On Motor
  • manual Lowering Operation By Pressing Lever
  • relief Valve Built In Power Pump To Prevent Overloading
  • 1 Sets Truck Adapters Included
  • lifting Capacity: 9,000 Lbs
  • the Overall Height 111-3/32″
  • the Overall Width 133-1/4″
  • column Width 10.59″
width Between Two Post 106.3″
  • Base Width 18.89″
  • column Thickness Of Steel 11/64″
  • carriage Thickness Of Steel 3/16″
  • arms Thickness Of Steel 15/64″
  • front Arm 29.9″-47.2″
  • rear Arm 29.9″-47.2″
  • min Pad Height: 3-7/8″
  • lift Height Max: 71.6″
  • drive-thru Width Clearance: 99.2″
  • Time To Full Rise: 20-60 Sec
  • Shipping Weight: 1150 Lbs

Before Installing Your Auto Lift, Check The Following:

Lift Location: Always Use Architect’s Plans When Available. Check Layout Dimension Against Floor Plan Requirements Making Sure Adequate Space Is Available. Your Lift Requires A 220v Or 110v , 30amp, Single Phase, Grounded Electrical Source. There Should Be Room Enough To Operate The Lift In A Safe Manner And Without Restrictions. Overhead Area: The Area Where The Lift Will Be Located Should Be Free Of Overhead Obstructions Such As Heaters, Building Supports, Electrical Lines, Doors, Lights, Etc. Floor Area: Visually Inspect The Site Where The Lift Is To Be Installed And Check For Cracked Or Defective Concrete. Floor Requirements: A Level Floor Is Suggested For Proper Installation And Level Lifting. Small Differences In Floor Slopes May Be Compensated For By Proper Shimming. If A Floor Is Of Questionable Slope, Consider A Survey Of The Site And/or The Possibility Of Pouring A New Level Concrete Slab.
  • New Concrete Must Be Adequately Cured For At Least 30 Days.
  • Do Not Install Auto Lift On Any Asphalt Surface Or Any Surface Other Than Concrete.
  • Do Not Install Auto Lift On Expansion Seams Or On Cracked Or Defective Concrete.
  • Do Not Install Auto Lift On A Second/elevated Floor Without First Consulting Building Architect.
  • Do Not Install Auto Lift Outdoors Unless Special Consideration Has Been Made To Protect The Power Unit From Inclement Weather Conditions.

Concrete Specifications:

  • All Models Must Be Installed On 3,000 Psi Reinforced Concrete Only. Additional Concrete Requirements Will Vary By Lift.
  • 8,500 Lbs – 10,000 Lbs Lifts: 4? Minimum Thickness
  • 11,000 Lbs – 15,000 Lbs Lifts: 6? Minimum Thickness

About this item:

For over ten years, our tow dollies have been a top choice for RVers and folks searching for premium car tow dollies online, our new STOW and GO FOLDING Featuring a robust steel frame, swivel tire pan, and a fold-and-store design, makes traveling with a second vehicle a pleasurable proposition. Construction: We built our 670-lb folding car tow dolly with heavy-duty galvanized steel. The process of galvanizing involves coating the steel in layers of zinc. For  buyers, this means you’re getting a trailer that’s hardwearing, rust-resistant, and one heck of a head-turner. Additionally, we equip the tow dolly with a swivel pan to relieve stress on the vehicle-in-tow’s front end. Instead of engaging the vehicle-in-tow’s steering box when turning, the swivel pan does the work. Fold and Store: unique design provides a space-saving solution by allowing the user to transform the car tow dolly from 132.5 inches length extended to just 72 inches folded. How? Just fold up the ramps; remove the clevis pin from the tongue, and use the swivel wheel on the trailer jack to roll the tongue towards the tow dolly’s fender. That’s a size reduction of nearly 50 percent. And that’s space you can use for something else in your driveway, garage, or RV lot. Hydraulic Surge Brakes: In most states, brakes and an emergency breakaway system are required by law. So, it fit with every drum brakes and a Demco actuator (includes a breakaway cable). These are standard equipment on our foldable car tow dolly at no additional charge.

Features:

  • Integrated folding ramps
  • Folding tongue
  • 72″ folded length—reduced footprint saves space and money at RV lots
  • 3,500 lb Maximum over-the-axle weight
  • Trailer tongue jack with swivel wheel—included
  • Tongue handle for easy moving, coupling, and uncoupling
  • 2″ Ball coupler
  • 2 Safety chains
  • Integrated, adjustable winches—MAXIMUM ease-of-use
  • Hydraulic surge brakes
    • Drum brakes
    • Demco DA66 actuator
    • Emergency breakaway system
  • 14″ Steel wheels
  • Sturdy steel fenders—silver powder-coated
  • Tilting swivel pan—easy loading
  • 2 Redundant security chains for added peace of mind—included
  • DOT approved LED taillights—LED lights last longer than incandescent bulbs
  • Low-weight, high-strength tubular steel construction—tow your second vehicle with confidence
  • 4-pin flat connector—factory molded
  • Premium galvanized finish—ensures rust-free protection for years to come

Specifications:

  • Empty Weight 670 lb
  • Maximum Over-the-Axle Weight 3,500 lb
  • Maximum Vehicle-in-Tow Curb Weight 4,900 lb
  • Coupler: 2”
  • Finish: Galvanized
  • 6,500-lb-rated Lashing Winches
  • 12,000 lb Rated Tire Nets (Free straps included)
  • Dual Safety Chain Set
  • Heavy Duty Spindles & Cast Hubs w/ Easy-Lube Hub
  • Sturdy Steel Fenders—silver powder-coated
  • Tires: 14” Heavy Duty
  • DOT Approved Lighting
  • Pre-Wired Factory Wiring Harness
  • Drum Brakes
  • Demco Actuator and Emergency Breakaway System (hydraulic surge brakes)
  • LED Taillights
  • Maintenance-Free Teflon Pads for Easy Turning Pan
  • Tire Pan Width : 79 1/2 in. maximum width  / 43 3/4 in. minimum width
  • Requirements: Flat 4-Pin Connector / 2″ Ball / 18″ Tongue Height
Introducing the Carry-On Trailer 6-ft x 12-ft Enclosed Trailer—a versatile and secure solution for all your cargo hauling needs. This enclosed trailer is designed to keep your gear safe, protected from the elements, and ready for your journeys, whether they’re long trips or quick outings. Secure and Weatherproof Storage: Our cargo trailers are engineered to safeguard your valuable gear and equipment, providing a secure and weatherproof storage space. With this trailer, you can embark on longer trips with peace of mind, knowing your belongings are protected from rain, wind, and other elements. Plus, you have the option to leave your gear loaded, eliminating the need to unload every time you don’t need it. Bullnose Aerodynamic Design: This model features a bullnose aerodynamic front, which not only adds extra storage space but also enhances the trailer’s aerodynamics on the road. It helps reduce wind resistance, making your towing experience smoother and more fuel-efficient. Convenience at Your Fingertips: Equipped with four tie-down rings, a ramp door, and a side door, this trailer offers convenience and versatility. Secure your cargo with ease and access it effortlessly from multiple points. Safety and Compliance: The 2-inch coupler with safety chains ensures a secure connection to your towing vehicle, prioritizing safety during transit. Additionally, the trailer’s lighting and design adhere to local and state code regulations, keeping you compliant with road safety standards. Spacious and Reliable: With a 6-ft width and a 12-ft length, this enclosed trailer offers ample space for your cargo. Its 3,500 lb. axle, 15-inch tires, and robust 2990 lb. weight rating ensure reliable and stable towing. Dependable Flooring: The plywood floor provides a solid and stable surface for your gear and equipment, ensuring it remains secure and protected during transport. Please note that registration, taxes, and fees may vary by state, so be prepared for some paperwork and processing during pickup. The Carry-On Trailer 6-ft x 12-ft Enclosed Trailer in classic white not only adds a touch of style but also signifies its reliability and functionality. Trust in this trailer to keep your gear safe and secure, allowing you to enjoy your trips with confidence and convenience.

XINKONG 9,000 LB L2910 2 POST LIFT CAR LIFT AUTO TRUCK H

  • XINKONG
  • COME WITH ADJUSTABLE PADS. TRUCK ADAPTERS ARE INCLUDED
  • SAFETY MECHANISM:
  • DOUBLE POINT SAFETY LOCK RELEASE
  • AUTOMATIC ARM LOCK RESTRAINTS
  • RELIEF VALVE BUILT IN POWER PUMP TO PREVENT OVERLOADING
  • DOOR GUARDS PROTECTION RUBBER
  • UP-LIMIT SWITCH TO PROTECT CYLINDERS WORKING STROKE USED IN SAFE LENGTH SCOPE
  • HEAVY DUTY 5/16″ DIAMETER CABLE AND 4.56″ PULLEY REDUCE HIGH STRESS ON SYNCHRONIZATION PROCESS AND INCREASE CABLE LIFE
  • STIFFENED BASE PLATE 15/32″ THICKNESS
  • ULTRA HIGH MOLECULAR SELF LUBRICATING NYLON SLIDER ENSURES CARRIAGE SMOOTH MOVING UP AND DOWN
  • ANCHOR BOLTS/MOUNTING HARDWARE INCLUDED

CONTROL SYSTEM

  • LIFTING OPERATION BY PRESSING “UP” BUTTON ON MOTOR
  • MANUAL LOWERING OPERATION BY PRESSING LEVER
  • RELIEF VALVE BUILT IN POWER PUMP TO PREVENT OVERLOADING
  • LIFTING CAPACITY: 9,000 LBS
  • THE OVERALL HEIGHT 145 21/32″
  • THE OVERALL WIDTH 133-1/4″
  • COLUMN WIDTH 10.59″

DISTANCE BETWEEN 2 POST 106-5/16″

  • Overall width 131-1/2″
  • Base Width 14-9/16″
  • Column Thickness of Steel 11/64″
  • Carriage Thickness of Steel 3/16″
  • Arms Thickness of Steel 15/64″
  • Front Arm 29.9″-47.2″
  • Rear Arm 29.9″-47.2″
  • Min pad height: 3-7/8″
  • Lift height max: 74-13/16
  • Drive-thru width clearance: 99-7/32″
  • Time to full rise: 55 sec
  • Shipping Weight: 1370 lbs
Site Selection Before installing your auto lift, check the following: Lift Location: Always use architect’s plans when available. Check layout dimension against floor plan requirements making sure adequate space is available. Your lift requires a 220v or 110v , 30amp, single phase, grounded electrical source. There should be room enough to operate the lift in a safe manner and without restrictions. Overhead Area: The area where the lift will be located should be free of overhead obstructions such as heaters, building supports, electrical lines, doors, lights, etc. Floor Area: Visually inspect the site where the lift is to be installed and check for cracked or defective concrete. Floor Requirements A level floor is suggested for proper installation and level lifting. Small differences in floor slopes may be compensated for by proper shimming. If a floor is of questionable slope, consider a survey of the site and/or the possibility of pouring a new level concrete slab. New concrete must be adequately cured for at least 30 days. DO NOT install auto lift on any asphalt surface or any surface other than concrete. DO NOT install auto lift on expansion seams or on cracked or defective concrete. DO NOT install auto lift on a second/elevated floor without first consulting building architect. DO NOT install auto lift outdoors unless special consideration has been made to protect the power unit from inclement weather conditions. Concrete Specifications All models MUST be installed on 3,000 PSI reinforced concrete only. Additional concrete requirements will vary by lift. 8,500 lbs – 10,000 lbs lifts: 4? Minimum Thickness 11,000 lbs – 15,000 lbs lifts: 6? Minimum Thickness Shipping: – We only ship inside the USA 48 States (Free to Commercial Address Only). – Residential or Farmland Delivery $100 Extra Charge from Freight Company. – We do not ship to Alaska, Hawaii, Guam, Virgin Islands, Puerto Rico, PO Box addresses or APO/FPO addresses. Equipment Required for unloading: -Forklift or Tractor is required from customer for unloading the product. -Terminal Pickup can be requested if customer does not have the ability to unload.
Tow Dolly Stock Number 035365 Year: 2020 Manufacturer: Deck Over Dolly MFG Model Num: 85X8SA Trailer Size: 8.5X8 Trailer Color: Black
Trailer weight: 1090lb/7000gvwr Carry Capacity: 5910lb 2-5/16″ A Frame Coupler 14000# (1) 7000lb Torsion Axle with Electric Brakes and Breakaway Kit and Battery EZ Lube Hubs ST225/75R15 Load Range E Radial Tires 6 Lug Gray Mod Steel Wheels Removable ATP Stoneguard 60″ Triple Tube Tongue Front Wind Jack Weld On D-Rings Steel Treadplate Deck Black Automotive Grade Painted Deck and Frame (1) Set of Straps for Vehicle (1) Wrench (3) Ramps
Introducing the Carry-On Trailer 6-ft x 16-ft Treated Lumber Utility Trailer with Ramp Gate—a powerful workhorse that’s ready to handle your heavy-duty hauling needs. With its impressive load capacity and practical features, this trailer is designed to make your tasks easier and more efficient. Robust Load Capacity: This utility trailer boasts a substantial 5,250 lb. load capacity, making it ideal for transporting large and heavy items. Whether you’re moving construction materials, equipment, or bulky cargo, this trailer has you covered. High Sides for Added Security: The 24-inch high sides provide extra security for your cargo, ensuring that it stays in place during transit. You can haul taller items with confidence, knowing they are well-protected. Convenient Folding-Ramp Gate: The folding-ramp gate makes loading and unloading a breeze. It provides easy access to the trailer bed, allowing you to roll or slide your cargo on and off with minimal effort. Safety First: Safety is a priority, and this trailer delivers. The 2-5/16-inch coupler comes with safety chains to ensure a secure connection to your towing vehicle, and it meets safety standards for worry-free towing. Durable and Reliable: The pressure-treated lumber floor is not only durable but also designed to withstand heavy use. It provides a solid and stable surface for your cargo, ensuring it remains secure during transport. Lockable Storage Box: The addition of a lockable storage box is a convenient feature. It allows you to keep your tools, equipment, or other valuable items secure while on the road. Dependable and Road-Ready: With a 6-ft width and a 16-ft length, this utility trailer offers ample space for various hauling needs. The 3,500 lb. axle ensures stability and reliability, even when transporting heavy loads. Lighted to DOT Specs: This trailer is equipped with lighting that meets DOT (Department of Transportation) specifications, ensuring that you remain visible and compliant with safety regulations on the road. The Carry-On Trailer 6-ft x 16-ft Treated Lumber Utility Trailer with Ramp Gate combines strength, convenience, and safety into one impressive package. Its sleek black finish not only adds a touch of style but also signifies its durability and functionality. Trust in this trailer to simplify your hauling tasks and make them more efficient and productive.
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Sold000000
Shipping

Related products

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Description
  • Weight
  • Dimensions
  • Additional information
  • Add to cart
Click outside to hide the comparison bar
Compare